Två nya stilexempel för FlexibleList

[lang_en]I have uploaded two new example styles for FlexibleList today. Well, one was kind of old (Odd/Even) it’s just that I had forgotten to add it as a downloadable file.

The really new example is Two Columns which shows you how to basically create a two column table. But it’s not a real HTML table. All is done with CSS and you can adjust the width of the leftmost column in the CSS.

Go have a look and download them if you think they may come in handy somewhere.[/lang_en]
[lang_sv]Jag har lagt upp två nya stilexempel för FlexibleList idag. Ett exempel är visserligen inte helt nytt (Odd/Even) det var bara det att jag hade glömt att lägga upp den nerladdningsbara filen.

Det verkligen nya exemplet är Two Columns som visar hur ni kan skapa en tvåkolumnstabell. Fast det är inte en riktig HTML tabell. Allt är gjort med CSS och ni kan justera bredden på den vänstra kolumnen i CSS:en.

Ta en titt och ladda hem dom om du tror att dom kan komma till nytta någonstans.[/lang_sv]

Comments (2)

Stash beta öppen för alla

[lang_en]The previously private betatest of @stash is now open for everyone. Before putting a releasedate on it I want it tested as much as possible and my own possibilities for testing has become a bit limited for some time and will remain so for a while longer (more info about that later). But i’m all up for fixing any bugs that you find while testing.

The current beta is not fully compatible with the upcoming RW 4.0 but before I release the final version the goal is to have it working with RW 4.0. And best of all, this update will be free of charge for exising users.

For more information please visit the beta page and read the instructions there, especially about reporting bugs.[/lang_en]
[lang_sv]Den tidigare privata betatesten av @stash är nu öppen för alla. Innan jag släpper den slutliga versionen så vill jag ha den testad så mycket som möjlligt och jag har för närvarande begränsade möjligheter att testa själv och det kommer att förbli så en tid till (mer om det senare). Men jag kommer att fixa alla buggar ni hittar när ni testar.

Den nuvarande betaversionen är inte helt kompatibel med RW 4.0 men innan jag släpper den slutliga versionen är målet att den ska fungera med RW 4.0. Men bäst av allt är att den här uppdateringen är fri för alla registrerade användare.

För mer information gå till beta-sidan och läs instruktionerna där, speciellt dom om buggrapportering.[/lang_sv]

No comments

Betatestare för @stash sökes

[lang_en]Are you…

  • good at finding usecases based on a feature description?
  • good at giving detailed feedback?
  • running Tiger and/or Leopard?

Do you…

  • like @stash and use it frequently?
  • like to experiment?
  • have Growl installed?

[/lang_en]
[lang_sv]Är du…

  • bra på att räkna ut hur man kan hitta användningsfall baserat på en funktionsbeskrivning?
  • bra på att ge detaljerad feedback?
  • en som använder Tiger och/eller Leopard?

Gillar du…

  • att använda @stash och använder du det ofta?
  • att experimentera?
  • Growl?

[/lang_sv]
(mer…)

No comments

FlexibleList v1.1

It’s time for a major update to FlexibleList today that extends it’s flexibility even further. You are now able to create styles complete with javascript and images, and put information directly in the page header etc.

The custom variables are now supported in almost every editable field in FlexibleList. There are still some limitations but if a variable isn’t supported it will not be converted so your should be able to easily see if it worked or not.

The UI has also seen it’s share of evolution, although it may not always be so obvious. If you feel that the item list or the content fields are too small when you are editing them you can now collapse the part of the splitview that you don’t want to see. Just drag the splitter towards the end that you want to hide and it will go away until you drag it back. FlexibleList also has full support for drag&drop between projects and copy&paste of items.

Just to get you started with the new styles I have bundled two updated styles with FlexibleList, Smooth Scroll and Tabifier. These styles have been updated and are now fully standalone so you just have to apply the styles to your page and they will work (unless there are some javascript conflict with other scripts on your page/theme). There is no longer any need to manually add the needed javascripts to the FlexibleList page.

If you want to now more about what has changed go and read the changelog. And be sure to read the user manual as it has been updated with this release.

FlexibleList continues to be donationware and requires RapidWeaver 3.5.x and OS X 10.3.9.

Go grab your copy now…

No comments

Internetproblem mellan USA och Sverige

[lang_en]Since a few days internet access from Sweden to certain webservers in the US is gone. I can as an example not access cocoadev.com (which is a great Cocoa resource on the web) and many other sites as well due to this.

Everything boils down to a conflict between Telia and Cogent. Two companies arguing about a business agreement and we are now suffering from this… I’m not blaming one of them for this as it takes two to tango but searching at Google for Cogent doesn’t bring up a nice picture.[/lang_en]
[lang_sv]Sedan några dagar har internet accessen från Sverige till vissa webbservrar i USA varit nere. Jag kan t.ex. inte komma åt cocoadev.com (vilket är en väldigt bra Cocoa referens) och många andra hemsidor.

Allt grundar sig på en konflikt mellan Telia och Cogent. Två företag som bråkar om en affärsuppgörelse som vi nu får lida för… Jag säger inte att ett visst företag för detta eftersom det krävs två för att bråka. Men om man söker på Google efter Cogent så är det inte en snygg historik.[/lang_sv]

No comments

High-Light v1.2.1

[lang_en]Time for a small update of High-Light again. This time the update is focused towards a few fellow users who use localized versions of RapidWeaver where High-Light isn’t appearing in the menu. With this release High-Light will now appear in the format menu also for users in Japan and Italy. But there is also a small bugfix in this release.

Here is the full list of changes:

  • High-Light will now work with Japanese and Italian localized versions of RapidWeaver.
  • Bugfix: The linenumber padding option is now only available if the source-highlight binary supports it.

If you have stumbled upon any of these problems then go grab your copy now.[/lang_en]
[lang_sv]Dags igen för en liten uppdatering av High-Light. Den här gången är uppdateringen riktad mot dom som använder språkanpassade versioner av RapidWeaver där High-Light inte dyker upp i menyn. Med den här versionen så dyker High-Light upp in format menyn även för användare i Japan och Italien. Men det är också en liten buggfix med.

Här är listan på ändringar:

  • High-Light fungerar nu med Japanska och Italienska versionen av RapidWeaver.
  • Buggfix: Alternativet för att padda radnummren är avaktiverat om inte source-highlight har stöd för den funktionen.

Om du har stött på något av dessa problem så ta då och hämta din kopia nu.[/lang_sv]

No comments

@stash v1.2.1 tillgänglig

[lang_en]A bugfix release of @stash is now available for download. It contains a fix for a fault that can cause RapidWeaver to crash when you group items together. This update is recommended for everyone that is using @stash.

So go to the download page and get your copy of @stash v1.2.1.
[/lang_en]
[lang_sv]En bugfix för @stash finns nu tillgänglig. Den innehåller en fix för ett fel som kan orsaka att RapidWeaver krashar när du grupperar objekt. Den här uppdateringen rekommenderas för alla användare av @stash.

Så gå till nedladdningssidan och hämta din kopia av @stash v1.2.1.
[/lang_sv]

No comments

FlexibleList v1.0.2

FlexibleList has just been updated to v1.0.2. This release contains a few bugfixes and one new feature. The changelog has all the details on the changes in this release so be sure to check it out.

So what is the new feature? Ever heard of a plugin called Blocks? 😉

If you have updated Blocks to v3.1.1 you should notice that your FlexibleList pages can now be used in pageblocks. There is unfortunately one thing that doesn’t play so nice with Blocks but it’s out of my control to fix it so check the user manual for a workaround.

Download the update and enhance your RapidWeaver experience 🙂

No comments

Uppdatering av Tabifier

[lang_en]The ”Tabifier” example style for FlexibleList has been updated with some IE related fixes to the CSS. The original style example had some redrawing problems with our ”favorite” webbrowser…

If you have downloaded ”Tabifier” before go grab the update now.[/lang_en]
[lang_sv]”Tabifier” stilen för FlexibleList har uppdaterats med några IE relaterade fixar för CSS:en. Den ursprungliga stilen hade lite problem med vår ”favorit” läsare…

Om du har laddat hem ”Tabifier” förut gå då och hämta uppdateringen nu.[/lang_sv]

No comments

Tabifier – ett stilexempel för flexiblelist

[lang_en]I have started to put some example styles for FlexibleList on my website to show you what you can do with this plugin besides using the default style. The examples are/will be available on the FlexibleList example page.

First out is ”Tabifier”…use of a javascript that creates a ”tabbed” interface, ready to have it’s looks modified by you.

It’s very easy to use, you import the .flstyle file into your FlexibleList page and add the javascript to that page in the page inspector. The javascript creates the ”tabbed” look and you manage the content/name of the tabs with the items in your FlexibleList.[/lang_en]
[lang_sv]Jag har börjat sätta ihop lite exempel på stilar för FlexibleList på min hemsida för att visa vad du kan göra med det här plugin:et utöver den stil som medföljer. Exemplen finns på den här sidan.

Först ut är ”Tabifier”…där jag använder ett lättanvänt javascript som skapar en sida med ”flikar”, som är redo att modifieras av dig.

Det är väldigt enkelt att använda, importera .flstyle filen i din FlexibleList sida och lägg till javaskriptet på den sidan i RapidWeavers ”page inspector”. Javaskriptet sköter om att skapa ”flikarna” och du sköter om innehållet/namnet på flikarna med objekten i FlexibleList.[/lang_sv]

No comments